Hardware supported by chan-capi
Basically all cards should work, which - provides a CAPI 2.0 compatible interface.
Most of the cards don't provide this interface, but their drivers do. Here is a list of cards known to be working:
Dialogic / formerly known as Eicon NetworksDIVA Server from [http://www.dialogic.com Dialogic] (V and non-V cards) - DIVA Server BRI (basic rate interface, 2 channels)
- DIVA Server 2FX (basic rate interface, 2 channels)
- DIVA Server 4BRI (four BRI)
- DIVA Server PRI (primary rate interface, 30 channels)
- DIVA Server E1/T1 (like PRI 30/23 channels)
- DIVA Server 4PRI (four PRI)
- DIVA Server Analog 4P (4 POTS lines)
- DIVA Server Analog 8P (8 POTS lines)
the V(oice)- variants don't support faxing with onboard DSPs
special features supported by Dialogic DIVA Server cards with chan-capi- onboard DSP DMTF detection.
- onboard DSP DTMF generation.
- onboard DSP echo-cancel.
- onboard DSP faxing.
- Line-Interconnect: direct bridge of b-channels even across cards via bus master DMA.
- RTP: onboard DSP processes RTP frames including anti-jitter-buffer and different codecs (chan-capi-0.7 and better)
- NT-mode: card act as ISDN-switch (not BRI Rev1, 2FX). A BriCrossCable is needed for that.
AVMISDN cards by AVM - FritzPCI
- Fritz USB 2.X
- B1
- C2
- C4
mISDN- all supported cards by mISDN, but the mISDN-CAPI interface may be incomplete
PrimuX- PrimuX ISDN cards from Gerdes AG (Since a proprietary libcapi20 is provided by vendor for these cards, you cannot mix with CAPI cards of another vendor. This also makes debugging difficult.)
| 